Tool Push Block Assembly Machine Easy To Maintain

Introduction of Tool Push Block Assembly Machine Easy To Maintain:

Yuyao Zhiheng invites you to visit our factory to purchase the newest, best-selling, affordable, and high-quality Tool Push Block Assembly Machine Easy To Maintain. We are looking forward to working with you.To keep the Tool Push Block Assembly Machine easy to maintain, you can take the following steps:Regular cleaning: Regularly remove dust, dirt and debris from the machine to prevent them from interfering with the operation of the machine.Lubricate parts: The sliding and rotating parts of the machine are regularly lubricated to reduce friction and wear.Check fasteners: Check the fasteners of the machine regularly, such as screws and nuts, to make sure they are not loose or damaged.Replace worn parts: When the parts of the machine become worn or damaged, replace them promptly to prevent the problem from getting worse.Train the operator: Ensure that the operator understands the correct use of the machine and maintenance procedures to reduce the failure caused by improper operation.

Parameter (Specification) of Tool Push Block Assembly Machine Easy To Maintain:

1. Automatic feeding tool rest base

2. Automatic feeding shrapnel

3. Automatically detect the presence of tool rest base

4. Automatic feeding spring

5. Automatic feeding switch

6. Automatic feeding block

7. Automatically detect the presence of block

8. Automatic fitting the top cover

9. Automatically detect whether there is cover and whether there is elastic

10. Automatic blanking of good and bad products

Specification,

Power supply:AC 220V /50HZ

Air  pressure：above 0.6 MPa

Yield:1600-1800PCS/hour